This is a video tutorial on how to speed up the start time of your Windows XP computer. It is totally safe and easy to do. I will try and find out if this works on Windows Vista.
|
Nothing\'s more annoying than moving your mouse one way while your cursor goes the other -- or just stays put. Chances are a quick cleaning of this device will get you back on track. To complete this How-To you will need: A damp cloth A dry cloth Tweezers A razor Spray cleaner Step 1: Shut down computer Shut down your computer and remove the mouse from the USB port. Step 2: Remove track ball Flip the mouse over and twist the track ball cover to remove the ball. Tap the mouse on your hand or tabletop to remove the ball. Step 3: Wipe off track ball Wipe the ball with a clean, damp cloth. Step 4: Clean mouse components Clean the track ball compartment with a dry cloth. Use your fingernail, tweezers, or a razor to remove anything that\'s caked on. Warning: Be careful not to dislodge any tiny wires or components. Step 5: Replace track ball and cover Replace the track ball and cover. Step 6: Clean exterior Wipe down the outside of the mouse, including the cable, with a cloth sprayed with cleaner. Tip: If you use a wireless mouse, you only need to clean the outside, not the internal components. Step 7: Turn on computer Plug the USB cable back in and turn on the computer. Once it\'s up and running, use your mouse to make sure you\'re back in business. Thanks for watching How To Clean a Computer Mouse! [More] [Less]
|
Installing Microsoft Windows 7 RC: First of all the why would you want to do this? There are a couple reasons. 1.Hardware and software are becoming more sophisticated so in order to stay in front of the curve you should know what technologies are available. 2.Increase productivity - people often forget that increasing production is the main reason that they invest in technology to begin with. 3.Its Free for 13 months. (I like free). 4.Vista is an abomination. Well maybe it\'s not that bad but certainly 7 is a lot faster and a lot better. 5.You can always go back to XP or Vista if it does not work for you. Very little risk. Check if it will run on your system: A PC for testing with these system requirements: o1 GHz or faster 32-bit (x86) or 64-bit (x64) processor o1 GB RAM (32-bit) / 2 GB RAM (64-bit) o16 GB available disk space (32-bit) / 20 GB (64-bit) oDirectX 9 graphics processor with WDDM 1.0 or higher driver Windows 7 Upgrade Advisor: Not a bad idea to run this on your current system: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4bd9-9e51-2497c146af15 Here\'s what you\'ll need: 1. DVD burner 2.Blank DVD 3.ISO burning software. http://download.cnet.com/UltraISO-Premium/3000-2646_4-10177302.html 4.Partitioning software: you do not need to partition. (http://www.partition-tool.com/ ) And in fact I set off for partitions in this demonstration but you can get away with one or none 5.Microsoft Windows live account 6.Download of Windows 7 RC 7. External hard drive for backup, or something comparable. Step one: Get everything backed up. This is a great time to take inventory of your software and program files to make sure in the case of an emergency that you\'ll be able to recover your data quickly. As part of a best practice I put all of my data files on one separate hard drive and in addition I use Carbonite Backup (http://www.carbonite.com/) along with Amazon S3 (http://aws.amazon.com/s3/). You may think this is overkill but you Always want to have more than one shot at your data. Do not just depend on one source for backup. Step two: Partition your hard drive. Free software from ESEUS http://www.partition-tool.com/ I set up for partitions one partition runs the XP operating system the second partition runs Microsoft\'s seven operating system the third partition is an image of Microsoft 7 and a fourth partition is for all of my data files. You do not have to do it this way but this way allows you to flip back and forth from XP to Windows 7. And having an image of this if there is any corruption you can upload that very quickly. Step three: Download Microsoft seven. http://www.microsoft.com/Windows/Windows-7/download.aspx You will need a Live account for this. http://home.live.com/ If you do not have a live account they are free. Step four: Create a boot disk. You will burn the ISO file to a DVD that will be bootable. http://download.cnet.com/UltraISO-Premium/3000-2646_4-10177302.html Step five: Pop bootable DVD into your DVD drive and install Windows 7 to one of the four partitions that you made on your hard drive. You do need to have approximately 16 GB of space available. Step six: Reinstall all of your programs. The general rule of thumb is if your software works on Vista then it should work on 7. I have found this to be true. Step Seven: Enjoy 7. And make sure to run all of the updates. Note: does anybody know why it\'s called Microsoft 7; was one of the programmers watching an old episode of Seinfeld From Microsoft website: IMPORTANT: The RC will expire on June 1, 2010. Starting on March 1, 2010, your PC will begin shutting down every two hours. Windows will notify you two weeks before the bi-hourly shutdowns start. To avoid interruption, you\'ll need to rebuild your test machine using a valid version of Windows before the software expires. You\'ll need to rebuild your test PC to replace the OS and reinstall all your programs and data. [More] [Less]
|
Some real quick tips on how to speed up your pc!
|
Do you boot your computer and then go out for a coffee? Maybe...just maybe it\'ll be ready by the time you get back. In this video I\'ll show you how to drastically reduce your boot-time with free utilities already included in Windows!
|
Think about how many times a day you touch your keyboard ... ready to clean it yet? To complete this How-To you will need: A keyboard disconnected from a desktop computer, or a laptop keyboard A flathead screwdriver A bowl of warm water Dish-washing soap A towel A can of compressed air Cotton balls Rubbing alcohol A digital camera A hand-held vacuum or upright vacuum with a hand-held attachment Step 1: Shake keyboard If you\'re cleaning a laptop keyboard, remove the cord and the battery. Flip the keyboard upside down and gently shake it to dislodge any debris. Tip: For future reference, take a photo of your keyboard before you dismantle it. Step 2: Remove keys Turn the keyboard right-side up and rest on a flat surface. Slide the tip of a flathead screwdriver under the bottom left key, pry it free, and soak in a bowl of soapy water. Repeat with the rest of the small keys. Leave the larger keys -- such as the space bar, enter, and shift -- since they\'re harder to reattach. Step 3: Clean and dry keys Rinse the keys individually in fresh water and lay them on a towel to air-dry. Let the keys dry for 24 hours. Step 4: Spray compressed air Take a can of compressed air and spray the entire keyboard shell. Tip: You can also run a hand-held vacuum over the shell. Step 5: Dab with alcohol Dip the end of a cotton ball in rubbing alcohol and run it along the board, making sure to reach all the nooks and crannies. Step 6: Reassemble When the keys have dried completely, reassemble the keyboard by snapping each key back into place. Step 7: Keep it clean Your keyboard looks like new! To help keep it clean, wash your hands before each use and never eat or drink while typing. Thanks for watching How To Clean Your Computer Keyboard! [More] [Less]
|
found it on internet after gave my MCSE70-290:(
|
found it on internet after gave my MCSE 70-290(
|
F-8\'?>http://gdata.youtube.com/feeds/api/videos/wTVA8VQFu7E2010-05-09T22:21:34.000Z2010-08-27T18:51:32.000Z70-291 Remove_Interface_DNS_Server.avigeekondoorhttp://gdata.youtube.com/feeds/api/users/geekondoorEducation70, 291, Remove, Interface, DNS, Server70-291 Remove_Interface_DNS_Server.aviyt:statistics favoriteCoun [More]
found it on internet after gave my MCSE70-290:(
found it on internet after gave my MCSE70-290:(
found it on internet after gave my MCSE70-290:(
found it on internet after gave my MCSE 70-290(
found it on internet after gave my MCSE 70-290:(
This is a video tutorial on how to speed up the start time of your Windows XP computer. It is totally safe and easy to do. I will try and find out if this works on Windows Vista.
Some real quick tips on how to speed up your pc!
Do you boot your computer and then go out for a coffee? Maybe...just maybe it\'ll be ready by the time you get back. In this video I\'ll show you how to drastically reduce your boot-time with free utilities already included in Windows!